Set of 1-seater student desks with a shelf, adjustable for growth groups No. 3-6 + T-shaped height-adjustable chair No. 3-6 with HPL coating Overall dimensions: 700x500x580-760 mm. Weight: 10.20 kg. Overall dimensions of the table: ● width - 700 mm; ● depth - 500 mm; ● height - 580, 640, 700, 760 mm. The table consists of an ergonomically shaped tabletop (rounded corners on 4 sides) and a screen with a shelf, between metal frames. A hook is attached to the side rack of the frame. The tabletop contains a hole for a glass with stationery and has an anti-scoliosis cutout and a pencil case. The wooden parts of the table are made of laminated chipboard, 16 mm thick. The edges of all wooden elements are covered with edge material - PVC: • screen - 0.5 mm. • shelf - 1.0 mm. • tabletop - 1.0 mm. The metal parts of the student's table are made of flat oval pipes 50x30x1.2 mm, 38x20x1.2 mm, 30x15x1.2 mm and round pipes with a diameter of 32 mm and a diameter of 25 mm, and also have a protective decorative coating - powder enamel. The height of the table is adjusted using screws through the holes in the frame and legs, between which a plastic adapter sleeve is installed. Plastic tips are attached to the ends of the frame, which prevent injuries to students and damage to the floor. Chipboard color: beech, milk oak, gray, artisan beech pearlescent. Frame color: light green (RAL6018), gray (RAL7035), yellow (RAL1018), graphite moire (RAL7024) Overall dimensions of the chair: 385x435x700-820 mm. Weight: 4.59 kg. Back size – 380x200 mm; Seat size – 380x350 mm. The chair can be adjusted in height: 340 mm (No. 3), 380 mm (No. 4), 420 mm (No. 5) and 460 mm (No. 6). The chair consists of an overlay seat, backrest and metal frame. The seat and backrest are made of bent-glued plywood 8-9 mm thick and covered with a colorless, environmentally friendly water-based varnish. The corners of the seat and backrest have rounded radii to prevent injury. The metal frame is made of round pipes with a diameter of 25 mm and 32 mm. The backrest and seat are attached to the frame with screws and nuts. The height of the chair is adjusted using screws through the holes in the frame. The frame is powder-coated. Adjustment is carried out using a through-bolt and nut clamp with a cap nut fixed in the pipe to prevent loosening during loosening. Plastic tips are attached to the ends of the frame, which prevent injuries to students and damage to the floor. An intermediate internal polyurethane sleeve is installed in the height adjustment points, which ensures smooth adjustment, eliminates creaking and scratches when adjusting the height. The backrests and seats are attached to the chair frame using special mushroom-shaped bolts and rounded nuts, which protects against injuries and damage to clothing. There is a hole on the bottom of the frame through which the marking of the growth groups will be visible when adjusting the height of the chair. The color marking according to the growth groups is applied in the form of a circle of about 10 mm. Also, a scale of marking of growth groups is applied to the metal frame using laser engraving. Frame color: light green (RAL6018), gray (RAL7035), yellow (RAL1018), graphite moire (RAL7024) HPL color: beech, milk oak, gray.