School Set No. 3–6: Tilting-Top Desk and HPL Chair

Set of 1-seater student table with adjustable tabletop angle and shelf, height group No. 3-6 + T-shaped height-adjustable chair No. 3-6, with HPL coating
Overall dimensions of the table: 700x500x580-760 mm. Weight: 10.50 kg.
Overall dimensions of the table:
● width – 700 mm;
● depth – 500 mm;
● height – 580, 640, 700, 760 mm.
The wooden parts of the table are made of laminated chipboard, with a thickness of at least 16 mm. The edges of all wooden elements are covered with edge material – PVC tape with a thickness of 1.0 mm and 0.5 mm.
The metal parts of the student's table are made of flat oval tubes 50x30x1.2 mm, 38x20x1.2 mm, 30x15x1.2 mm and round tubes with a diameter of 25 mm and 32 mm, and also have a protective decorative coating - powder enamel.
The height of the table is adjusted by means of a through screw-nut tie with a cap nut fixed in the holes of the frame and leg to prevent it from loosening during loosening. Plastic tips are attached to the ends of the frame, which prevent injury to students and damage to the floor.
There is a hole on the lower part of the frame through which the marking of growth groups will be visible when adjusting the height of the table. The color marking according to the growth groups is applied in the form of a circle of about 10 mm. Also, a scale for marking growth groups is applied to the metal frame using laser engraving.
The tabletop tilt angle is adjusted using a mechanism such as a growth sensor, with mandatory limiters for safe use by students. The limiter is a clamping mechanism with a convenient plastic handle that blocks unauthorized changes in the tabletop tilt angle. The tabletop can be installed both at an angle and horizontally. Tabletop tilt angles: 0°, 3°, 5°, 7°, 9°, 12°, 14°, 16°.
In the central part of the tabletop there is a pencil case and holes for a book holder. There is a hole for a glass with stationery, which is protected by a plastic sleeve.
Chipboard color: beech, yellow/lime, sakura/lavender, milk oak.
Frame color: light green (RAL6018), gray (RAL7035), yellow (RAL1018), graphite moire (RAL7024)
Overall dimensions of the chair: 385x435x700-820 mm. Weight: 4.59 kg.
Backrest size – 380x200 mm;
Seat size – 380x350 mm.
The chair can be adjusted in height: 340 mm (No. 3), 380 mm (No. 4), 420 mm (No. 5) and 460 mm (No. 6). The chair consists of an overlay seat, backrest and metal frame. The seat and backrest are made of bent-glued plywood 8-9 mm thick and covered with HPL plastic 0.5 mm thick. The corners of the seat and backrest have rounded radii to prevent injury. The metal frame is made of round pipes with a diameter of 25 mm and 32 mm. The backrest and seat are attached to the frame with screws and nuts. The height of the chair is adjusted using screws through the holes in the frame. The frame is powder-coated. The legs of the chair are equipped with special tips that prevent damage to the floor and injury to students. Adjustment is carried out using a through-bolt and nut clamp with a cap nut fixed in the pipe to prevent it from loosening during loosening. Plastic tips are attached to the ends of the frame to prevent injury to students and damage to the floor. An internal polyurethane bushing is installed at the height adjustment points, which ensures smooth adjustment and eliminates creaking and scratches when adjusting the height. The backrests and seats are attached to the frame of the student chairs using special mushroom-shaped bolts and rounded nuts, which prevents injuries and damage to clothing. The corners of the seat and backrest have a rounded radius to prevent injuries. There is a hole on the bottom of the frame through which the marking of the height groups will be visible when adjusting the height of the table. The color marking according to the height groups is applied in the form of a circle of about 10 mm. Also, a scale of marking the height groups is applied to the metal frame using laser engraving.
Frame color: light green (RAL6018), gray (RAL7035), yellow (RAL1018), graphite moire (RAL7024)
HPL color: beech, milky oak, jasmine, blue, gray.
Possible combinations of frame and HPL color:
- yellow frame - HPL beech, milky oak, jasmine, blue;
- gray frame - HPL beech, milk oak;
- light green frame - HPL beech, milk oak.