GEROM / Inside GEROM / Buyer's Guide
Inside GEROM · Buyer's Guide
Four school chairs, four different jobs
Key facts
- Four chair constructions, one EN 1729 tender line
- All four models covered by an IBIC certificate for EN 1729-1 and EN 1729-2
- 48460, 48475 and 48490 delivered assembled; 190169 delivered as a kit
- 190169: size marks 4 to 6, load capacity 1,250 N over 100,000 cycles (IBIC)
A tender spec for school chairs often fits in one line: chair, EN 1729, size mark 6, quantity 240. Four very different chairs can meet that line. They differ by a few euros per unit, and over ten years of daily use in a classroom the difference shows up in things the spec never mentions: what the floor looks like, how long cleaning takes, how easily the chairs move around the room.
Below are four constructions from our range, with some notes on where each one fits best.

The classic: separate seat and backrest on a welded frame

Model 48460 is the chair most people picture when they think of a school: a tubular steel frame with a plywood seat and a plywood backrest fixed to it as two separate parts.
It's still the volume chair in most tenders, and the design has practical reasons to last. The frame carries the load, and the seat and backrest are simply attached to it. The chair arrives fully assembled, 50 to a pallet, and can go straight into the classroom.
It fits best in ordinary classrooms. In rooms where furniture is wiped down several times a day, a one-piece shell is usually the more practical choice.
One shell on four legs

Model 48475 replaces the seat and backrest with a single moulded plywood shell. We press these shells ourselves. In an earlier issue we showed how a pressed shell is trimmed on a 5-axis CNC machine, and that trimming is what keeps the edge of the shell even from one chair to the next.
A shell has no gap between the seat and the backrest, which makes it quicker to clean. That's why shell chairs are common in canteens, labs and multipurpose rooms. The shell is available with an HPL surface, which takes scratches and cleaning agents better than lacquered veneer. It costs more, and a buyer should know why before comparing prices.
The same shell on a sled frame

Model 48490 uses the same HPL plywood shell on a different base: a frame bent from one continuous tube, with runners along the floor instead of four separate legs.
The difference is mostly in how the chair behaves on the floor. Four legs put the weight on four small points, and a student leaning back puts nearly all of it on two of them. Runners spread the load along a longer line of contact, so the chair is less likely to dent soft flooring and slides more easily when it's pushed back from the desk. In rooms where chairs are moved all day, and in older buildings where floors are already uneven, this makes a noticeable difference.
A sled frame requires more bending and more precise welding at the joints, since it is a closed form. All our frames are welded by robots, and the tube is cut on a laser before welding, which we covered in earlier issues. For a sled chair this is what keeps both runners resting flat on the floor.
Adjustable, on a T-base

Model 190169 is the chair for rooms where you don't know in advance who will sit there. It covers size marks 4 to 6, so one model replaces three fixed-height ones.
We wrote about adjustable furniture in a recent issue, and the same logic applies here. An adjustable chair has to meet the requirements of every size mark it covers, and the adjustment point takes the most load over the years. Model 190169 has an IBIC certificate for load capacity: 1,250 N over 100,000 cycles. A small window in the frame shows the colour code of the size mark the chair is set to, so a teacher can check at a glance whether the chair matches the desk.
It pays off where the size split changes from year to year or the room serves several groups. For a class that keeps the same split, fixed-height chairs do the job for less.
How they arrive
Models 48460, 48475 and 48490 are delivered assembled. Model 190169 comes as a kit: the frame and the plywood parts are packed separately. A kit takes less space in the truck, but someone has to put the chairs together on site, and on a large school order that is a real line in the budget. It's worth deciding who does the assembly before the offer goes out, not after the delivery date is set.
What doesn't change between them
All four models are covered by an IBIC certificate for EN 1729-1 and EN 1729-2. The frames go through the same process: laser cutting, robotic welding and automatic powder coating. So the choice between them comes down to how the chair will be used rather than to differences in build quality.
Questions worth asking the school
When the tender only gives the size mark, a few questions help choose the construction. How often are the chairs moved, and are they put up on the desks every evening for cleaning? What kind of floor is in the room, and how old is it? Is the room used by one class or by several groups during the day? How is the furniture cleaned, and with what?
The answers usually point to one of the four constructions fairly quickly, and a distributor who asks them tends to get fewer complaints after delivery.
If you're preparing an offer for a school project and want to compare models, send us a message. We'll share our catalogue and help you put together a proposal.
Questions buyers ask
Which school chair construction is easiest to clean?
A one-piece plywood shell, as on models 48475 and 48490. There is no gap between the seat and the backrest, so the chair is quicker to wipe down, which is why shell chairs are common in canteens, labs and multipurpose rooms.
What is the advantage of a sled-base school chair?
Runners spread the load along a longer line of contact with the floor than four legs do. The chair is less likely to dent soft flooring and slides more easily when it is pushed back from the desk.
Can one adjustable chair replace several fixed-height models?
Yes. Model 190169 covers EN 1729 size marks 4 to 6, so one model replaces three fixed-height ones. An adjustable chair has to meet the requirements of every size mark it covers.
Are GEROM school chairs delivered assembled?
Models 48460, 48475 and 48490 are delivered assembled. The height-adjustable model 190169 comes as a kit, with the frame and the plywood parts packed separately.
